SCADA Wonderware Intouch X Arduino (Simulasi Proteus) Part 1

Burn Bootloader using USB-TTL PL2303 + ProMini (ArduinoISP) to ATmega328 (UNO)

 

To burn the bootloader, follow these steps:

1. Upload the ArduinoISP sketch onto your Arduino board(ProMini). (You'll need to select the board and serial port from the Tools menu that correspond to your board.)

2. Wire up the Arduino board and microcontroller as shown in the diagram to the right.

3. Select "Arduino Duemilanove or Nano w/ ATmega328" from the Tools > Board menu. 

4. Select "Arduino as ISP" from Tools > Programmer

5. Run Tools > Burn Bootloader

Useful resource :
1. T³: Programming an ATtiny84A from Arduino

2. From Arduino to a Microcontroller on a Breadboard

3. From Arduino Uno to ATmega328 – Shrinking your Arduino Projects

4. Solving SS pin to RESET target

NodeMCU LCD I2C with DHT21/AM2301

    Rangkaian


    Sebelum memprogram sesuai perancangan, dilakukan cek pada koneksi LCD I2C untuk mengetahui alamat yang akan digunakan atau yang terhubung. Install terlebih dahulu library "LiquidCrystal I2C" oleh Frank de Brabander.

    Setelah selesai diinstall, upload kode program berikut ini untuk melakukan scanning alamat I2C-nya.

Latihan Animation Script and Settings Wonderware Intouch #2 (Modul 4 SCADA)

Latihan Animation Script and Setting Wonderware Intouch